Skip to content
Welcome to Osmo Africa - Call us on 087 238 0762 for any technical advice
Welcome to Osmo Africa - Call us on 087 238 0762 for any technical advice

OSMO Polyx®-Oil, 3062, Original, High Solid, Clear, Matt

by Osmo
R 499.90


Osmo Polyx®-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister.   


Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.


 


Surface Preparation


Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces


Method of Application


With Flat Brush, Floor Brush, or Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation. After drying, quickly apply a second coat also thinly.


When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.