Polyx Aqua is a clear, water-based, single-component polymer floor sealer developed for hard-wearing interior wooden floors. It delivers a smooth, durable and wear-resistant surface while keeping the natural look and grain of the wood clearly visible.
Designed as a complete system in one product, Polyx Aqua is used for the base coat, intermediate coat and final coat—saving time, simplifying application and ensuring consistent results across the floor.
Ideal For
-
Solid wood flooring
-
Parquet, plank and strip floors
-
OSB floors
-
Wooden stairs
-
Common European timber species such as Oak, Beech, Pine, Spruce and Birch
A trial application is recommended on exotic, oily or resin-rich wood species.
Coverage & Consumption (Key Info)
-
Consumption: 100–120 ml per m² per coat
-
Coverage: approx. 8–10 m² per litre per coat
What does a 5 L can cover?
-
Single coat: approx. 40–50 m²
-
Complete 3-coat system: approx. 13–17 m² total finished floor area
Polyx Aqua is applied in three coats (base, intermediate and final) using the same product.
Application Overview
-
Ready to use – do not thin
-
Apply with a roller suitable for water-based coatings
-
Roll wet-on-wet to avoid lap marks
-
Allow approx. 2 hours drying time between coats
-
Light intermediate sanding recommended before the final coat
Light foot traffic is possible after 24 hours. Allow at least 7 days before placing rugs or heavy furniture.
Performance & Benefits
-
Hard-wearing and abrasion resistant
-
Water-repellent and dirt resistant
-
Resistant to common household spillages (water, wine, coffee, tea, juice)
-
Smooth, even finish without hiding the wood grain
-
Low-VOC, water-based formulation
-
Safe once cured – suitable for children’s toys (EN 71.3 compliant)
Finish Options
-
Clear Satin
-
Clear Matt
Available sizes: 5 L
For interior use only -
Datasheets